ColorJet III Printable Inkjet Heat Transfer :: Dark Materials

Use ColorJet III by Specialty Materials to decorate t-shirts with your water based/pigmented desktop inkjet printer!

ColorJet III is an opaque white material with a matte finish, coated for water-based inkjet printing. Use inkjet “print and cut system” or cut by hand. You can apply ColorJet III with heated hand iron and firm downward pressure. Make sure that the print is thoroughly dry before pressing!

Both products are available in packages of 8½” x 11″ and 11″ x 17″ sheets for easy use with desktop inkjet printers.

ColorJet III Light CJ3-2185
One-step printing for light colored fabrics. When printing, reverse the design and then the carrier becomes the transfer mask when heat-pressing! When heat-activated, this material becomes clear.

ColorJet III Dark CJ3-2175
One-step printing for dark fabrics. This is an opaque material. Be sure to print the design ‘right-reading’. We do not recommend using a transfer mask – instead – cut around the design, peel off the backing and place down on the garment with Teflon or Transfer Tissue (included in pack) on top, before pressing.

Special Precautions for Both: Make sure that the print is thoroughly dry before pressing. Do not stretch or cracking will occur.

Special Precautions for Light CJ3-2185: Before pressing, use a lint roller to remove any dust or fibers on the garment.