Vinyl | Printable | Heat Transfer

Inkjet printable transfers for Dark Materials make it easy to create your own printed image for application to colored garments ranging from darker pastels to black.    A heat press is recommended for applying this product because of the temperature and pressure requirements.  Peel from the backing paper or use a heat transfer mask before pressing.

StarCraft Transfers for Dark Materials are easy to identify by the red logo printed on the back of each sheet as well as the red instructions.

Click here for help deciding which transfer material is right for your application

Application and Care Instructions

• Press at 350 Degrees for 30 Seconds under MEDIUM pressure
• Peel when entirely COOL to the touch
• To wash, turn garment inside out, wash in cold water.  Do not bleach.
• Tumble dry low heat (hang dry recommended).
• If ironing, do NOT iron directly on the applied image.
• Heat Transfer Mask is recommended.  Larger, one-piece transfers can be applied without a transfer mask.

StarCraft Transfers for Light Materials 8.5" x 11" sheets make it easy to create your own printed image for application to light-colored materials ranging from white to about lighter pastel colors. The unique polymer StarCraft uses actually transfers the inkjet printed image to the garment. A heat press is highly recommended for applying this product due to temperature and pressure requirements. When applying to colored garments you may see the polymer where no ink is printed around the image--this will fade and soften after the garment is washed once or twice.

Application and Care Instructions

• Press at 375 Degrees for 30 Seconds under HIGH pressure
• Peel HOT, all in one motion, do not stop in the middle of peeling or it may show a line in your finished design.
• To wash, turn garment inside out, wash in cold water. Do not bleach. Tumble dry low heat (hang dry recommended).
• If ironing, do NOT iron directly on the applied image.

Click here for help deciding which transfer material is right for your application

Use ColorJet III by Specialty Materials to decorate t-shirts with your water based/pigmented desktop inkjet printer!

ColorJet III is an opaque white material with a matte finish, coated for water-based inkjet printing. Use inkjet “print and cut system” or cut by hand. You can apply ColorJet III with heated hand iron and firm downward pressure. Make sure that the print is thoroughly dry before pressing!

Both products are available in packages of 8½” x 11″ and 11″ x 17″ sheets for easy use with desktop inkjet printers.

ColorJet III Light CJ3-2185
One-step printing for light colored fabrics. When printing, reverse the design and then the carrier becomes the transfer mask when heat-pressing! When heat-activated, this material becomes clear.

ColorJet III Dark CJ3-2175
One-step printing for dark fabrics. This is an opaque material. Be sure to print the design ‘right-reading’. We do not recommend using a transfer mask – instead – cut around the design, peel off the backing and place down on the garment with Teflon or Transfer Tissue (included in pack) on top, before pressing.

Special Precautions for Both: Make sure that the print is thoroughly dry before pressing. Do not stretch or cracking will occur.

Special Precautions for Light CJ3-2185: Before pressing, use a lint roller to remove any dust or fibers on the garment.

Use ColorJet III by Specialty Materials to decorate t-shirts with your water based/pigmented desktop inkjet printer!

ColorJet III is an opaque white material with a matte finish, coated for water-based inkjet printing. Use inkjet “print and cut system” or cut by hand. You can apply ColorJet III with heated hand iron and firm downward pressure. Make sure that the print is thoroughly dry before pressing!

Both products are available in packages of 8½” x 11″ and 11″ x 17″ sheets for easy use with desktop inkjet printers.

ColorJet III Light CJ3-2185
One-step printing for light colored fabrics. When printing, reverse the design and then the carrier becomes the transfer mask when heat-pressing! When heat-activated, this material becomes clear.

ColorJet III Dark CJ3-2175
One-step printing for dark fabrics. This is an opaque material. Be sure to print the design ‘right-reading’. We do not recommend using a transfer mask – instead – cut around the design, peel off the backing and place down on the garment with Teflon or Transfer Tissue (included in pack) on top, before pressing.

Special Precautions for Both: Make sure that the print is thoroughly dry before pressing. Do not stretch or cracking will occur.

Special Precautions for Light CJ3-2185: Before pressing, use a lint roller to remove any dust or fibers on the garment.