- Accessories & Tools
- Adhesive Permanent
- Cutters
-
HTV (Heat Transfer)
- Athena Custom Vinyl
- DecoFilm Brilliant Chameleon HTV
- DecoFilm Soft Metallic HTV
- DecoFlock Economy
- DecoSparkle HTV
- FashionFlex Puff
- GlitterFlex Ultra HTV
- HotMelt
- PearlFlex HTV
- Premium DecoFlock
- Reflection Decoration HTV
- Stahl's Pattern HTV
- Textile Foil
- ThermoFlex Fashion Patterns HTV
- ThermoFlex Plus HTV
- Printable
- Transfer Tape
- Accessories & Tools
- Adhesive Permanent
- Cutters
-
HTV (Heat Transfer)
- Athena Custom Vinyl
- DecoFilm Brilliant Chameleon HTV
- DecoFilm Soft Metallic HTV
- DecoFlock Economy
- DecoSparkle HTV
- FashionFlex Puff
- GlitterFlex Ultra HTV
- HotMelt
- PearlFlex HTV
- Premium DecoFlock
- Reflection Decoration HTV
- Stahl's Pattern HTV
- Textile Foil
- ThermoFlex Fashion Patterns HTV
- ThermoFlex Plus HTV
- Printable
- Transfer Tape
3 products

StarCraft Magic :: Deceit Glitter Silver
- Durability: 3-5 Years Outdoors (Fluorescent Colors life expectancy is 6 months or less outdoors)
- Adhesive: Clear Acrylic Permanent Pressure Sensitive
- Thickness: 3mil (76 microns)
- Cut Settings: Generally this film can be cut on the same settings as other standard adhesive vinyl films. We do recommend small test cuts and adjusting pressure accordingly and as required. Â
Cut Limitations: Due to the stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.
Tunneling:
Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting. Â
Note:Â Life expectancy can vary depending on the harshness of UV exposure.
StarCraft Magic :: Spectrum Rose Gold
- Durability: 3-5 Years Outdoors (Fluorescent Colors life expectancy is 6 months or less outdoors)
- Adhesive: Clear Acrylic Permanent Pressure Sensitive
- Thickness: 3mil (76 microns)
- Cut Settings: Generally this film can be cut on the same settings as other standard adhesive vinyl films. We do recommend small test cuts and adjusting pressure accordingly and as required. Â
Cut Limitations: Due to the stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.
Tunneling:
Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting. Â
Note:Â Life expectancy can vary depending on the harshness of UV exposure.
(All photos listed are the same vinyl.)

StarCraft Magic :: Deceit Glitter Sky Blue
- Durability: 3-5 Years Outdoors (Fluorescent Colors life expectancy is 6 months or less outdoors)
- Adhesive: Clear Acrylic Permanent Pressure Sensitive
- Thickness: 3mil (76 microns)
- Cut Settings: Generally this film can be cut on the same settings as other standard adhesive vinyl films. We do recommend small test cuts and adjusting pressure accordingly and as required. Â
Cut Limitations: Due to the stiffness of the film, smaller intricate cuts may be difficult to weed and work with, as well as have a lower tolerance for lifting from the surface after applied. We do not recommend sharp corners or edges as these may perpetuate peeling from the surface, especially if handled.
Tunneling:
Due to the stiffness of the film, when unrolled "tunneling" may occur which is when the film lifts from the release liner and bubbles or "tunnels" form. This can be corrected by simply lifting the film gently from the release liner and gently using a squeegee or other flat edge to lay the film back town prior to cutting. Â
Note:Â Life expectancy can vary depending on the harshness of UV exposure.